 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PA080XS1 Version : 0.2 TECHNICAL MODEL SPECIFICATION NO. : PA080XS1 Customer's Confirmation Customer Date By PVI's Confirmation Confirmed By Prepared By FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 http://www.AZDISPLAYS.com Date : Mar.22,2005 This technical specification is subject to change without notice. Please return 1 copy with your signature on this page for approval. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:1 PA080XS1 TECHNICAL SPECIFICATION CONTENTS NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 - ITEM Cover Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Pixel Arrangement and input connector pin NO. Absolute Maximum Ratings Electrical Characteristics Power Sequence Optical Characteristics Handling Cautions Reliability Test Block Diagram Packing Revision History PAGE 1 2 3 3 3 4 5 6 6 7 17 17 21 22 23 24 25 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:2 PA080XS1 1. Application This technical specification applies to 8" color TFT-LCD module, PA080XS1. The applications of the panel are car TV, portable DVD, GPS, multimedia applications and others AV system. 2. Features . Pixel in stripe configuration . Slim and compact . High Brightness . Image Reversion Up/Down and Left/Right . Column inversion driving 3. Mechanical Specifications Parameter Screen Size Display Format Active Area Dot Pitch Pixel Configuration Outline Dimension Surface Treatment Weight Specifications 8(diagonal) 1440 468 161.28 (H) 117.94 (V) 0.112(H) 0.252(V) Stripe 172.4(W) 131.99(H) 6.64(D)(typ.) Anti-Glare TBD Unit Inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:3 PA080XS1 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4 PA080XS1 5. Input / Output Terminals LCD Module Connector FPC Down Connect , 32 Pins , Pitch : 0.5 mm Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Symbol STH2 OEH POL MOD R/L VDD1 CPH3 CPH2 CPH1 VSS1 VDD2 VBVGVRVSS2 VB+ VG+ VR+ VSS2 STH1 VCOM OE1 OE2 OE3 U/D CKV STVD STVU VCC VEE VGH GND I/O I/O I I I I I I I I I I I I I I/O I I I I I I I/O I/O Description Start pulse for source driver Output enable for source driver P0larity control for column inversion Simultaneous/sequential mode select Left / Right Control for source driver Supply voltage of logic circuit for source driver Sample and shift clock for source driver Sample and shift clock for source driver Sample and shift clock for source driver Ground of logic circuit for source driver Supply voltage of analog circuit for source driver Video input B for negative polarity Video input G for negative polarity Video input R for negative polarity Ground for analog circuit for source driver Video input B for positive polarity Video input G for positive polarity Video input R for positive polarity Ground for analog circuit for source driver Start pulse for source driver Voltage for common electrode Output enable for gate driver Output enable for gate driver Output enable for gate driver Up / Down Control for gate driver Shift clock for gate driver Vertical start pulse Vertical start pulse Power supply for gate driver circuit Negative power gate driver Positive power gate driver Ground for gate driver Remark Note 5-2 Note 5-2 Note 5-2 Note 5-1 Note 5-1 Note 5-3 Note 5-4 Note 5-5 Note 5-1 U/D STVD Vcc Input GND Output Note 5-2 R/L STH1 Vcc input GND output STVU output input scanning direction up todown down to up STH2 output input scanning direction left to right right to left The definitions of Note 5-1,5-2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5 PA080XS1 Note 5-3 : VCC TYP. Note 5-4 : VEE TYP. Note 5-5 : VGH TYP. Note 5-6 : VDD2 TYP. Note 5-7 : VDD1 TYP. +3.3V -10V +20V +12V +3.3V 6. Pixel Arrangement and input connector pin NO. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6 PA080XS1 7. Absolute Maximum Ratings The followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit. Parameter Supply Voltage For Source Driver Symbol VDD2 VDD1 VCC Supply Voltage For Gate Driver VGH-VEE H Level VGH L Level VEE Analog Signal Input Level Storage Temperature Operation Temperature Notes 7-1 : Analog Input Voltage means VR,VG,VB. Notes 7-2 : Optical characteristics shown in Table 10-1 are measured under Ta=+25 . MIN. +9.0 -0.3 -0.3 -0.3 -0.3 -16 MAX. +13.5 +7.0 +6.0 +40.0 +25.0 +0.3 +11 5.5 +80 +70 Note 7-2 Unit V V V V V V V V Note 7-1 Remark VR+,VG+,VB+ +4 VR-,VG-,VB- 0 -30 -20 8. Electrical Characteristics 8-1) Recommended Driving condition for TFT-LCD panel Parameter Supply Driver Voltage For Source Analog Logic H level L level Sym bol VDD2 VDD1 VGH VEE DC MIN. +9 +4.5 +18 -11 Typ. +10 +5.0 +20 -10 +5.0 +4.0 7.5 +4.02.5 5.0 MAX. Unit +11 +5.5 +22 -9 V V V V Remark Supply Voltage For Gate Driver Analog Signal input Level Digital input voltage Digital output voltage Vcom Logic VCC +4.5 V+, AC VR+,VG+,VB+ (Analog video+) V+ ,DC 7.2 V- ,AC VR-,VG-,VB(Analog video-) V- ,DC 2.2 0.7 H level VIH -0.3 L level VIL 0.7 H level VOH L level VOL -0.3 VCOM 4.5 DC +5.5 V OP-P 7.8 V OP-P 2.8 V VDD1 V 0.3 V VDD1 V 0.3 V 5.5 V DC Component of VCOM Note 8-1 Note 8-1 : PVI strongly suggests that the VCOM DC level shall be adjustable , and the adjustable level range is 5.0V 0.5V , every module's VCOM DC level shall be carefully adjusted to show a best image performance. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7 PA080XS1 8-2) Back Light driving (JST BHSR-02VS-1 ,Pin No. 2) Pin No 1 2 Symbol VL1 VL2 Description Input terminal (Hi voltage side) Input terminal (Low voltage side) Remark Wire color: pink Wire color: white Note 8-2 Note 8-2 : Low voltage side of back light inverter connects with Ground of inverter circuits. Recommended driving condition for back light Parameter Symbol Min. Lamp voltage VL TBD Lamp current IL TBD Lamp frequency PL TBD Vs Starting voltage(25 ) (Reference Value) Vs Starting voltage(0 ) Ta= 25 Remark Note 8-3 Note 8-4 Note 8-5 Note 8-5 Typ. TBD TBD TBD Max. TBD TBD TBD TBD TBD Unit Vrms mA KHz Vrms Vrms (Reference Value) Note 8-3 : In order to satisfy the quality of B/L , no matter use what kind of inverter , the output lamp current must between Min. and Max. to avoid the abnormal display image caused by B/L. Note 8-4 : The waveform of lamp driving voltage should be as closed to a perfect sine wave as possible. Note 8-5 : This value is not output voltage of inverter. The voltage of inverter must larger than the starting voltage. The kick-off time must larger than 1 second. 8-3) Power Consumption Ta= 25 Parameter Symbol Conditions TYP. MAX Unit Remark Supply current for Gate Driver (Hi level) IGH mA VGH +20V TBD TBD Supply current for Gate Driver (Low level) IEE mA VEE -10V TBD TBD IDD1 VDD1 +3.3V TBD TBD Supply current for Source Driver(Digital) mA IDD2 VDD2 +12V TBD TBD Supply current for Source Driver(Analog) mA Supply current for Gate Driver (Digital) LCD Panel Power Consumption Back Light Lamp Power Consumption ICC VCC +3.3V TBD TBD TBD TBD TBD mA mW Note 8-6 W Note 8-7 Note 8-6 : The power consumption for back light is not included. Note 8-7 : Back light lamp power consumption is calculated by IL VL. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8 PA080XS1 8-4) Timing Characteristics Of Input Signals Characteristics Symbol Rising time tr Falling time tf High and low level pulse width tCPH CPH pulse duty tCWH STH setup time tSUH STH hold time tHDH STH pulse width tSTH STH period tH OEH pulse width tOEH Sample and hold disable time tDIS1 OEV pulse width tOEV CKV pulse width tCKV Clean enable time tDIS2 Horizontal display start tSH Horizontal display timing range tDH STV setup time tSUV STV hold time tHDV STV pulse width tSTV Horizontal lines per field tV Vertical display start tSV Vertical display timing range tDV Min. 9.2 30 20 20 61.5 400 400 256 Typ. 9.6 50 1 63.5 1.40 7.43 18 31.75 9.0 0 480 262 3 234 Max. 10 10 10.0 70 65.5 1 268 Unit ns ns MHz % ns ns tCPH s s s s s s tCPH/3 tCPH Ns Ns tH tH tH tH Remark CPH1~CPH3 CPH1~CPH3 STH1,STH2 STH1,STH2 STH1,STH2 STH1,STH2 OEH OEV CKV STVD,STVU STVD,STVU STVD,STVU The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9 PA080XS1 8-5) Signal Timing Waveforms The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10 PA080XS1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11 PA080XS1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12 PA080XS1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13 PA080XS1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14 PA080XS1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15 PA080XS1 Vertical timing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16 PA080XS1 9. Power on Sequence The Power on Sequence only effect by VCC, VDD,VEE and VGH, the others do not care. 1) 10ms T1 Horizontal Vertical Contrast Ratio At optimized Viewing angle =0 Response time Note 10-4 Note 10-3 Note 10-5 Note 10-3 Brightness Uniformity U White x Chromaticity y Lamp Life Time +25 Note 10-1 : The definitions of viewing angles =0 TBD TBD TBD TBD TBD TBD hrs The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17 PA080XS1 Note 10-2 : CR Luminance when Testing point is White Luminance when Testing point is Black (Testing configuration see 10-2 ) Contrast Ratio is measured in optimum common electrode voltage. Note 10-3 : 1. Topcon BM-7(fast) luminance meter 2 field of view is used in the testing (after 20~30 minutes operation). 0. Lamp current : 6 mA 0. Inverter model : TDK-347. Note 10-4 : The definition of response time: White 100% 90% Brightness 10% 0% Tr Black White Tf The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18 PA080XS1 Note 10-5 : The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U= The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1/6 2/6 2/6 1/6 1/6 2/6 2/6 1/6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:19 PA080XS1 10-2) Testing configuration BM-7(fast) Caution: 1. Environmental illumination 1 lux 2. Before test CR, Vcom voltage must be adjusted carefully to get the best 500mm CR. R,G,B signal input LCD Backlight Pattern generator LCD Display Testing Point Testing Point Pattern A R, G, B Waveform of Pattern A at Testing Point Pattern B R, G, B Waveform of Pattern B at Testing Point The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:20 PA080XS1 11. Handling Cautions 11-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. It is recommended to peel off the laminator before use and taking care of static electricity. 11-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 11-3) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:21 PA080XS1 12. Reliability Test No 1 2 3 4 5 6 Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) Vibration Test (non-operating) Shock Test (non-operating) Electrostatic Discharge Test (non-operating) Test Condition Ta = +80 , 240 hrs Ta = -30 , 240 hrs Ta = +70 , 240 hrs Ta = -20 , 240 hrs Ta = +60 , 90%RH, 240 hrs 7 8 9 -10 +70 , 200 Cycles 30 min 30 min Frequency 10 ~ 55 HZ Amplitude 1 mm Sweep time: 11 mins Test Period: 6 Cycles for each direction of X, Y, Z 100G, 6ms Direction: X, Y, Z Cycle: 3 times 200pF , 0 200V 1 time / each terminal Ta: ambient temperature Note: All about temperature test before must remove polarizers protective film. [Criteria] Under the display quality test conditions with normal operation state, there should be no change which may affect practical display function. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:22 PA080XS1 13.Block Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:23 PA080XS1 14 Packing TBD The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:24 PA080XS1 Revision History Rev. 0.1 0.2 Issued Date Nov 12,2004 Mar.22,2005 Revised Contents NEW Modify Page8: 8-3) Power Consumption The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:25 |
Price & Availability of PA080XS1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |